diff options
Diffstat (limited to 'unbound.conf')
| -rw-r--r-- | unbound.conf | 501 |
1 files changed, 501 insertions, 0 deletions
diff --git a/unbound.conf b/unbound.conf new file mode 100644 index 0000000..5d73c55 --- /dev/null +++ b/unbound.conf @@ -0,0 +1,501 @@ +# +# See unbound.conf(5) man page. +# +# this is a comment. + +#Use this to include other text into the file. +#include: "otherfile.conf" + +# The server clause sets the main parameters. +server: + # whitespace is not necessary, but looks cleaner. + + # verbosity number, 0 is least verbose. 1 is default. + verbosity: 1 + + # print statistics to the log (for every thread) every N seconds. + # Set to "" or 0 to disable. Default is disabled. + # Needed for munin plugin + statistics-interval: 0 + + # enable cumulative statistics, without clearing them after printing. + # Needed for munin plugin + statistics-cumulative: no + + # enable extended statistics (query types, answer codes, status) + # printed from unbound-control. default off, because of speed. + # Needed for munin plugin + extended-statistics: yes + + # number of threads to create. 1 disables threading. + num-threads: 2 + + # specify the interfaces to answer queries from by ip-address. + # The default is to listen to localhost (127.0.0.1 and ::1). + # specify 0.0.0.0 and ::0 to bind to all available interfaces. + # specify every interface on a new 'interface:' labelled line. + # The listen interfaces are not changed on reload, only on restart. + # interface: 0.0.0.0 + # interface: ::0 + # interface: 192.0.2.153 + # interface: 192.0.2.154 + # interface: 2001:DB8::5 + + # enable this feature to copy the source address of queries to reply. + # Socket options are not supported on all platforms. experimental. + # NOTE: Enable this option when specifying interface 0.0.0.0 or ::0 + # NOTE: Disabled per Fedora policy not to listen to * on default install + # interface-automatic: yes + interface-automatic: no + + # port to answer queries from + # port: 53 + + # specify the interfaces to send outgoing queries to authoritative + # server from by ip-address. If none, the default (all) interface + # is used. Specify every interface on a 'outgoing-interface:' line. + # outgoing-interface: 192.0.2.153 + # outgoing-interface: 2001:DB8::5 + # outgoing-interface: 2001:DB8::6 + + # number of ports to allocate per thread, determines the size of the + # port range that can be open simultaneously. + # outgoing-range: 256 + + # permit unbound to use this port number or port range for + # making outgoing queries, using an outgoing interface. + # outgoing-port-permit: 32768 + + # deny unbound the use this of port number or port range for + # making outgoing queries, using an outgoing interface. + # Use this to make sure unbound does not grab a UDP port that some + # other server on this computer needs. The default is to avoid + # IANA-assigned port numbers. + # outgoing-port-avoid: "3200-3208" + + # number of outgoing simultaneous tcp buffers to hold per thread. + # outgoing-num-tcp: 10 + + # number of incoming simultaneous tcp buffers to hold per thread. + # incoming-num-tcp: 10 + + # buffer size for UDP port 53 incoming (SO_RCVBUF socket option). + # 0 is system default. Use 4m to catch query spikes for busy servers. + # so-rcvbuf: 0 + + # EDNS reassembly buffer to advertise to UDP peers (the actual buffer + # is set with msg-buffer-size). 1480 can solve fragmentation (timeouts). + # edns-buffer-size: 4096 + + # buffer size for handling DNS data. No messages larger than this + # size can be sent or received, by UDP or TCP. In bytes. + # msg-buffer-size: 65552 + + # the amount of memory to use for the message cache. + # plain value in bytes or you can append k, m or G. default is "4Mb". + # msg-cache-size: 4m + + # the number of slabs to use for the message cache. + # the number of slabs must be a power of 2. + # more slabs reduce lock contention, but fragment memory usage. + # msg-cache-slabs: 4 + + # the number of queries that a thread gets to service. + # num-queries-per-thread: 1024 + + # if very busy, 50% queries run to completion, 50% get timeout in msec + # jostle-timeout: 200 + + # the amount of memory to use for the RRset cache. + # plain value in bytes or you can append k, m or G. default is "4Mb". + # rrset-cache-size: 4m + + # the number of slabs to use for the RRset cache. + # the number of slabs must be a power of 2. + # more slabs reduce lock contention, but fragment memory usage. + # rrset-cache-slabs: 4 + + # the time to live (TTL) value lower bound, in seconds. Default 0. + # If more than an hour could easily give trouble due to stale data. + # cache-min-ttl: 0 + + # the time to live (TTL) value cap for RRsets and messages in the + # cache. Items are not cached for longer. In seconds. + # cache-max-ttl: 86400 + + # the time to live (TTL) value for cached roundtrip times and + # EDNS version information for hosts. In seconds. + # infra-host-ttl: 900 + + # the time to live (TTL) value for cached lame delegations. In sec. + # infra-lame-ttl: 900 + + # the number of slabs to use for the Infrastructure cache. + # the number of slabs must be a power of 2. + # more slabs reduce lock contention, but fragment memory usage. + # infra-cache-slabs: 4 + + # the maximum number of hosts that are cached (roundtrip times, EDNS). + # infra-cache-numhosts: 10000 + + # the maximum size of the lame zones cached per host. in bytes. + # infra-cache-lame-size: 10k + + # Enable IPv4, "yes" or "no". + # do-ip4: yes + + # Enable IPv6, "yes" or "no". + # do-ip6: yes + + # Enable UDP, "yes" or "no". + # do-udp: yes + + # Enable TCP, "yes" or "no". + # do-tcp: yes + + # Detach from the terminal, run in background, "yes" or "no". + # do-daemonize: yes + + # control which clients are allowed to make (recursive) queries + # to this server. Specify classless netblocks with /size and action. + # By default everything is refused, except for localhost. + # Choose deny (drop message), refuse (polite error reply), + # allow (recursive ok), allow_snoop (recursive and nonrecursive ok) + # access-control: 0.0.0.0/0 refuse + # access-control: 127.0.0.0/8 allow + # access-control: ::0/0 refuse + # access-control: ::1 allow + # access-control: ::ffff:127.0.0.1 allow + + # if given, a chroot(2) is done to the given directory. + # i.e. you can chroot to the working directory, for example, + # for extra security, but make sure all files are in that directory. + # + # If chroot is enabled, you should pass the configfile (from the + # commandline) as a full path from the original root. After the + # chroot has been performed the now defunct portion of the config + # file path is removed to be able to reread the config after a reload. + # + # All other file paths (working dir, logfile, roothints, and + # key files) can be specified in several ways: + # o as an absolute path relative to the new root. + # o as a relative path to the working directory. + # o as an absolute path relative to the original root. + # In the last case the path is adjusted to remove the unused portion. + # + # The pid file can be absolute and outside of the chroot, it is + # written just prior to performing the chroot and dropping permissions. + # + # Additionally, unbound may need to access /dev/random (for entropy). + # How to do this is specific to your OS. + # + # If you give "" no chroot is performed. The path must not end in a /. + # chroot: "/var/lib/unbound" + chroot: "" + + # if given, user privileges are dropped (after binding port), + # and the given username is assumed. Default is user "unbound". + # If you give "" no privileges are dropped. + username: "unbound" + + # the working directory. The relative files in this config are + # relative to this directory. If you give "" the working directory + # is not changed. + directory: "/etc/unbound" + + # the log file, "" means log to stderr. + # Use of this option sets use-syslog to "no". + # logfile: "" + + # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to + # log to, with identity "unbound". If yes, it overrides the logfile. + # use-syslog: yes + + # print UTC timestamp in ascii to logfile, default is epoch in seconds. + log-time-ascii: yes + + # the pid file. Can be an absolute path outside of chroot/work dir. + pidfile: "/var/run/unbound/unbound.pid" + + # file to read root hints from. + # get one from ftp://FTP.INTERNIC.NET/domain/named.cache + # root-hints: "" + + # enable to not answer id.server and hostname.bind queries. + # hide-identity: no + + # enable to not answer version.server and version.bind queries. + # hide-version: no + + # the identity to report. Leave "" or default to return hostname. + # identity: "" + + # the version to report. Leave "" or default to return package version. + # version: "" + + # the target fetch policy. + # series of integers describing the policy per dependency depth. + # The number of values in the list determines the maximum dependency + # depth the recursor will pursue before giving up. Each integer means: + # -1 : fetch all targets opportunistically, + # 0: fetch on demand, + # positive value: fetch that many targets opportunistically. + # Enclose the list of numbers between quotes (""). + # target-fetch-policy: "3 2 1 0 0" + + # Harden against very small EDNS buffer sizes. + # harden-short-bufsize: no + + # Harden against unseemly large queries. + # harden-large-queries: no + + # Harden against out of zone rrsets, to avoid spoofing attempts. + harden-glue: yes + + # Harden against receiving dnssec-stripped data. If you turn it + # off, failing to validate dnskey data for a trustanchor will + # trigger insecure mode for that zone (like without a trustanchor). + # Default on, which insists on dnssec data for trust-anchored zones. + harden-dnssec-stripped: yes + + # Harden the referral path by performing additional queries for + # infrastructure data. Validates the replies (if possible). + # Default off, because the lookups burden the server. Experimental + # implementation of draft-wijngaards-dnsext-resolver-side-mitigation. + harden-referral-path: yes + + # Use 0x20-encoded random bits in the query to foil spoof attempts. + # This feature is an experimental implementation of draft dns-0x20. + use-caps-for-id: yes + + # Enforce privacy of these addresses. Strips them away from answers. + # It may cause DNSSEC validation to additionally mark it as bogus. + # Protects against 'DNS Rebinding' (uses browser as network proxy). + # Only 'private-domain' and 'local-data' names are allowed to have + # these private addresses. No default. + # private-address: 10.0.0.0/8 + # private-address: 172.16.0.0/12 + # private-address: 192.168.0.0/16 + # private-address: 192.254.0.0/16 + # private-address: fd00::/8 + # private-address: fe80::/10 + + # Allow the domain (and its subdomains) to contain private addresses. + # local-data statements are allowed to contain private addresses too. + # private-domain: "example.com" + + # If nonzero, unwanted replies are not only reported in statistics, + # but also a running total is kept per thread. If it reaches the + # threshold, a warning is printed and a defensive action is taken, + # the cache is cleared to flush potential poison out of it. + # A suggested value is 10000000, the default is 0 (turned off). + unwanted-reply-threshold: 10000000 + + # Do not query the following addresses. No DNS queries are sent there. + # List one address per entry. List classless netblocks with /size, + # do-not-query-address: 127.0.0.1/8 + # do-not-query-address: ::1 + + # if yes, the above default do-not-query-address entries are present. + # if no, localhost can be queried (for testing and debugging). + # do-not-query-localhost: yes + + # if yes, perform prefetching of almost expired message cache entries. + prefetch: yes + + # if yes, perform key lookups adjacent to normal lookups. + prefetch-key: yes + + # module configuration of the server. A string with identifiers + # separated by spaces. "iterator" or "validator iterator" + # module-config: "validator iterator" + + # File with DLV trusted keys. Same format as trust-anchor-file. + # There can be only one DLV configured, it is trusted from root down. + # Downloaded from https://secure.isc.org/ops/dlv/dlv.isc.org.key + dlv-anchor-file: "/etc/unbound/dlv.isc.org.key" + + # File with trusted keys for validation. Specify more than one file + # with several entries, one file per entry. + # Zone file format, with DS and DNSKEY entries. + # trust-anchor-file: "" + + # File with trusted keys, kept uptodate using RFC5011 probes, + # initial file like trust-anchor-file, then it stores metadata. + # Use several entries, one per domain name, to track multiple zones. + # auto-trust-anchor-file: "" + + # Trusted key for validation. DS or DNSKEY. specify the RR on a + # single line, surrounded by "". TTL is ignored. class is IN default. + # (These examples are from August 2007 and may not be valid anymore). + # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ==" + # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A" + + # File with trusted keys for validation. Specify more than one file + # with several entries, one file per entry. Like trust-anchor-file + # but has a different file format. Format is BIND-9 style format, + # the trusted-keys { name flag proto algo "key"; }; clauses are read. + # trusted-keys-file: "" + trusted-keys-file: /etc/unbound/root.key + + # Ignore chain of trust. Domain is treated as insecure. + # domain-insecure: "example.com" + + # Override the date for validation with a specific fixed date. + # Do not set this unless you are debugging signature inception + # and expiration. "" or "0" turns the feature off. + # val-override-date: "" + + # The time to live for bogus data, rrsets and messages. This avoids + # some of the revalidation, until the time interval expires. in secs. + # val-bogus-ttl: 60 + + # The signature inception and expiration dates are allowed to be off + # by 10% of the lifetime of the signature from our local clock. + # This leeway is capped with a minimum and a maximum. In seconds. + # val-sig-skew-min: 3600 + # val-sig-skew-max: 86400 + + # Should additional section of secure message also be kept clean of + # unsecure data. Useful to shield the users of this validator from + # potential bogus data in the additional section. All unsigned data + # in the additional section is removed from secure messages. + val-clean-additional: yes + + # Turn permissive mode on to permit bogus messages. Thus, messages + # for which security checks failed will be returned to clients, + # instead of SERVFAIL. It still performs the security checks, which + # result in interesting log files and possibly the AD bit in + # replies if the message is found secure. The default is off. + # NOTE: TURNING THIS ON DISABLES ALL DNSSEC SECURITY + val-permissive-mode: no + + # Have the validator log failed validations for your diagnosis. + # 0: off. 1: A line per failed user query. 2: With reason and bad IP. + val-log-level: 1 + + # It is possible to configure NSEC3 maximum iteration counts per + # keysize. Keep this table very short, as linear search is done. + # A message with an NSEC3 with larger count is marked insecure. + # List in ascending order the keysize and count values. + # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500" + + # instruct the auto-trust-anchor-file probing to add anchors after ttl. + # add-holddown: 2592000 # 30 days + + # instruct the auto-trust-anchor-file probing to del anchors after ttl. + # del-holddown: 2592000 # 30 days + + # auto-trust-anchor-file probing removes missing anchors after ttl. + # If the value 0 is given, missing anchors are not removed. + # keep-missing: 31622400 # 366 days + + # the amount of memory to use for the key cache. + # plain value in bytes or you can append k, m or G. default is "4Mb". + # key-cache-size: 4m + + # the number of slabs to use for the key cache. + # the number of slabs must be a power of 2. + # more slabs reduce lock contention, but fragment memory usage. + # key-cache-slabs: 4 + + # the amount of memory to use for the negative cache (used for DLV). + # plain value in bytes or you can append k, m or G. default is "1Mb". + # neg-cache-size: 1m + + # a number of locally served zones can be configured. + # local-zone: <zone> <type> + # local-data: "<resource record string>" + # o deny serves local data (if any), else, drops queries. + # o refuse serves local data (if any), else, replies with error. + # o static serves local data, else, nxdomain or nodata answer. + # o transparent serves local data, but resolves normally for other names + # o redirect serves the zone data for any subdomain in the zone. + # o nodefault can be used to normally resolve AS112 zones. + # + # defaults are localhost address, reverse for 127.0.0.1 and ::1 + # and nxdomain for AS112 zones. If you configure one of these zones + # the default content is omitted, or you can omit it with 'nodefault'. + # + # If you configure local-data without specifying local-zone, by + # default a transparent local-zone is created for the data. + # + # You can add locally served data with + # local-zone: "local." static + # local-data: "mycomputer.local. IN A 192.0.2.51" + # local-data: 'mytext.local TXT "content of text record"' + # + # You can override certain queries with + # local-data: "adserver.example.com A 127.0.0.1" + # + # You can redirect a domain to a fixed address with + # (this makes example.com, www.example.com, etc, all go to 192.0.2.3) + # local-zone: "example.com" redirect + # local-data: "example.com A 192.0.2.3" + # + # Shorthand to make PTR records, "IPv4 name" or "IPv6 name". + # You can also add PTR records using local-data directly, but then + # you need to do the reverse notation yourself. + # local-data-ptr: "192.0.2.3 www.example.com" + +## Python config section. To enable: +## o use --with-pythonmodule to configure before compiling. +## o list python in the module-config string (above) to enable. +## o and give a python-script to run. +#python: +# # Script file to load +# # python-script: "/etc/unbound/ubmodule-tst.py" + + +# Remote control config section. +remote-control: + # Enable remote control with unbound-control(8) here. + # set up the keys and certificates with unbound-control-setup. + # Note: required for unbound-munin package + control-enable: yes + + # what interfaces are listened to for remote control. + # give 0.0.0.0 and ::0 to listen to all interfaces. + # control-interface: 127.0.0.1 + # control-interface: ::1 + + # port number for remote control operations. + # control-port: 953 + + # unbound server key file. + server-key-file: "/etc/unbound/unbound_server.key" + + # unbound server certificate file. + server-cert-file: "/etc/unbound/unbound_server.pem" + + # unbound-control key file. + control-key-file: "/etc/unbound/unbound_control.key" + + # unbound-control certificate file. + control-cert-file: "/etc/unbound/unbound_control.pem" + +# Stub zones. +# Create entries like below, to make all queries for 'example.com' and +# 'example.org' go to the given list of nameservers. list zero or more +# nameservers by hostname or by ipaddress. If you set stub-prime to yes, +# the list is treated as priming hints (default is no). +# stub-zone: +# name: "example.com" +# stub-addr: 192.0.2.68 +# stub-prime: "no" +# stub-zone: +# name: "example.org" +# stub-host: ns.example.com. + +# Forward zones +# Create entries like below, to make all queries for 'example.com' and +# 'example.org' go to the given list of servers. These servers have to handle +# recursion to other nameservers. List zero or more nameservers by hostname +# or by ipaddress. Use an entry with name "." to forward all queries. +# forward-zone: +# name: "example.com" +# forward-addr: 192.0.2.68 +# forward-addr: 192.0.2.73@5355 # forward to port 5355. +# forward-zone: +# name: "example.org" +# forward-host: fwd.example.com |