diff options
Diffstat (limited to 'mock/site-defaults.cfg')
| -rw-r--r--[l---------] | mock/site-defaults.cfg | 312 |
1 files changed, 311 insertions, 1 deletions
diff --git a/mock/site-defaults.cfg b/mock/site-defaults.cfg index 01109b5..8c2c6f6 120000..100644 --- a/mock/site-defaults.cfg +++ b/mock/site-defaults.cfg @@ -1 +1,311 @@ -/etc/mock/site-defaults.cfg
\ No newline at end of file +# mock defaults +# vim:tw=0:ts=4:sw=4:et: +# +# If you want to alter just some setting for one user, you can put the +# configuration in: +# ~/.config/mock.cfg +# +# This config file is for site-specific default values that apply across all +# configurations. Options specified in this config file can be overridden in +# the individual mock config files. +# +# The site-defaults.cfg delivered by default has NO options set. Only set +# options here if you want to override the defaults. +# +# It's possible to use include statement in order to make one config included to another: +# include('/path/to/included/config.cfg') +# +# Entries in this file follow the same format as other mock config files. +# config_opts['foo'] = bar + +############################################################################# +# +# Things that we recommend you set in site-defaults.cfg: +# +# config_opts['basedir'] = '/var/lib/mock/' +# config_opts['cache_topdir'] = '/var/cache/mock' +# Note: the path pointed to by basedir and cache_topdir must be owned +# by group 'mock' and must have mode: g+rws +# config_opts['rpmbuild_timeout'] = 0 +# config_opts['use_host_resolv'] = True + +# You can configure log format to pull from logging.ini formats of these names: +# config_opts['build_log_fmt_name'] = "unadorned" +# config_opts['root_log_fmt_name'] = "detailed" +# config_opts['state_log_fmt_name'] = "state" +# +# mock will normally set up a minimal chroot /dev. +# If you want to use a pre-configured /dev, disable this and use the bind-mount +# plugin to mount your special /dev +# config_opts['internal_dev_setup'] = True +# +# internal_setarch defaults to 'True' if the python 'ctypes' package is +# available. It is in the python std lib on >= python 2.5. On older versions, +# it is available as an addon. On systems w/o ctypes, it will default to 'False' +# config_opts['internal_setarch'] = False +# +# the cleanup_on_* options allow you to automatically clean and remove the +# mock build directory, but only take effect if --resultdir is used. +# config_opts provides fine-grained control. cmdline only has big hammer +# +# config_opts['cleanup_on_success'] = 1 +# config_opts['cleanup_on_failure'] = 1 + +# The build user's homedir is partially cleaned up even when --no-clean is +# specified in order to prevent garbage from previous builds from altering +# successive builds. Mock can be configured to exclude certain files/directories +# from this. Default is SOURCES directory to support nosrc rpms. Paths are +# relative to build user's homedir +# config_opts['exclude_from_homedir_cleanup'] = ['build/SOURCES'] + +# By default Mock use simple chroot(1). When you set this to True +# it will use systemd-nspawn(1) +# config_opts['use_nspawn'] = False +# If you're using nspawn, then by default networking will be turned off +# for rpmbuild. This helps ensure more reproducible builds. +# config_opts['rpmbuild_networking'] = False +## When RPM is build in container then build hostname is set to name of +## container. This sets the build hostname to name of container's host. +## Works only in F25+ chroots +# config_opts['use_container_host_hostname'] = True + +# The default package manager is Yum +# config_opts['package_manager'] = 'yum' +# If you want to use DNF, set it to 'dnf'. To use DNf you need to have dnf and +# dnf-plugins-core installed + +# You can configure Yum, DNF, rpm and rpmbuild executable paths if you need to +# use different versions that the system-wide ones +# config_opts['yum_command'] = '/usr/bin/yum' +# config_opts['yum_builddep_command'] = '/usr/bin/yum-builddep' +# config_opts['dnf_command'] = '/usr/bin/dnf' +# config_opts['rpm_command'] = '/bin/rpm' +# config_opts['rpmbuild_command'] = '/usr/bin/rpmbuild' +# config_opts['target_dir'] = '/var/cache/%(package_manager)s/' +# +# By default a Yum/DNF update is performed before each rebuild +# config_opts['update_before_build'] = True + +# if you want mock to automatically run createrepo on the rpms in your +# resultdir. +# config_opts['createrepo_on_rpms'] = False +# config_opts['createrepo_command'] = '/usr/bin/createrepo_c -d -q -x *.src.rpm' + +# if you want mock to backup the contents of a result dir before clean +# config_opts['backup_on_clean'] = False +# config_opts['backup_base_dir'] = config_opts['basedir'] + "backup" + +# if you want to speed up the package installation and the build process, mock +# can use nosync library to skip fsync and related calls from programs called +# from within mock. It needs nosync library to be installed and for multilib +# target, it requires both architectures of nosync to be present. If these +# conditions aren't met, it won't be enabled +# config_opts['nosync'] = False +# if you cannot or don't want to install both architectures of nosync and still +# want mock to use it, you can force it, but then expect a lot of (generally +# harmless) error messages from ld.so when a 32bit program is executed +# config_opts['nosync_force'] = False + +# By default Mock unshare namespace so it is different from your other application +# in unpriviliged container, this is skipped. We will warn you that running mock +# and some other applications in the same container is not good idea and +# can be security risk. If you are fully aware of this risk or mock is your +# only one application in that container you can disable the warning here. +# config_opts['docker_unshare_warning'] = True + +############################################################################# +# +# plugin related. Below are the defaults. Change to suit your site +# policy. site-defaults.cfg is a good place to do this. +# +# NOTE: Some of the caching options can theoretically affect build +# reproducability. Change with care. +# +# config_opts['plugin_conf']['package_state_enable'] = True +# config_opts['plugin_conf']['package_state_opts'] = {} +# config_opts['plugin_conf']['package_state_opts']['available_pkgs'] = False +# config_opts['plugin_conf']['package_state_opts']['installed_pkgs'] = True +# config_opts['plugin_conf']['ccache_enable'] = False +# config_opts['plugin_conf']['ccache_opts'] = {} +# config_opts['plugin_conf']['ccache_opts']['max_cache_size'] = '4G' +# config_opts['plugin_conf']['ccache_opts']['compress'] = None +# config_opts['plugin_conf']['ccache_opts']['dir'] = "%(cache_topdir)s/%(root)s/ccache/u%(chrootuid)s/" +# config_opts['plugin_conf']['yum_cache_enable'] = True +# config_opts['plugin_conf']['yum_cache_opts'] = {} +# config_opts['plugin_conf']['yum_cache_opts']['max_age_days'] = 30 +# config_opts['plugin_conf']['yum_cache_opts']['max_metadata_age_days'] = 30 +# config_opts['plugin_conf']['yum_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/%(package_manager)s_cache/" +# config_opts['plugin_conf']['yum_cache_opts']['target_dir'] "/var/cache/%(package_manager)s/" +# config_opts['plugin_conf']['yum_cache_opts']['online'] = True +# config_opts['plugin_conf']['root_cache_enable'] = True +# config_opts['plugin_conf']['root_cache_opts'] = {} +# config_opts['plugin_conf']['root_cache_opts']['age_check'] = True +# config_opts['plugin_conf']['root_cache_opts']['max_age_days'] = 15 +# config_opts['plugin_conf']['root_cache_opts']['dir'] = "%(cache_topdir)s/%(root)s/root_cache/" +# config_opts['plugin_conf']['root_cache_opts']['compress_program'] = "pigz" +# config_opts['plugin_conf']['root_cache_opts']['extension'] = ".gz" +# config_opts['plugin_conf']['root_cache_opts']['exclude_dirs'] = ["./proc", "./sys", "./dev", +# "./tmp/ccache", "./var/cache/yum" ] +# +# bind mount plugin is enabled by default but has no configured directories to +# mount +# config_opts['plugin_conf']['bind_mount_enable'] = True +# config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/host/path', '/bind/mount/path/in/chroot/' )) +# +# config_opts['plugin_conf']['tmpfs_enable'] = False +# config_opts['plugin_conf']['tmpfs_opts'] = {} +# config_opts['plugin_conf']['tmpfs_opts']['required_ram_mb'] = 1024 +# config_opts['plugin_conf']['tmpfs_opts']['max_fs_size'] = '768m' +# config_opts['plugin_conf']['tmpfs_opts']['mode'] = '0755' +# config_opts['plugin_conf']['tmpfs_opts']['keep_mounted'] = False +# +# config_opts['plugin_conf']['chroot_scan_enable'] = False +# config_opts['plugin_conf']['chroot_scan_opts'] = { +## Regexp of files which should be copied from buildroot to resultdir. +# 'regexes': [ "^[^k]?core(\.\d+)?", "\.log$",], +## If set to True files are copied only if build failed. +# 'only_failed': True, +#} +# +# lvm_root plugin is not enabled by default and is distributed in separate +# subpackage mock-lvm. If you want to use it, it's recommended to disable the +# root_cache plugin, otherwise you'd be caching twice. +# config_opts['plugin_conf']['lvm_root_enable'] = False +# config_opts['plugin_conf']['lvm_root_opts'] = {} +# You need to give it a volume group with sufficient space. It won't touch any +# of the existing logical volumes, so you can use the same volume group you use +# for other purposes. It requires a name of the VG (not device path). +# config_opts['plugin_conf']['lvm_root_opts']['volume_group'] = 'my_vg' +# You need to specify the size that will mock's thinpool occupy. For regular +# packages with small set of dependencies, 2G should suffice. For large packages +# such as libreoffice, you should set it to at least 5 GB otherwise you may run +# out of space and the build process will be blocked +# config_opts['plugin_conf']['lvm_root_opts']['size'] = '2G' +# You can specify alternative pool metadata size, format is the same as size. +# Default value is determined by lvcreate based on size +# config_opts['plugin_conf']['lvm_root_opts']['poolmetadatasize'] = None +# When thin pool utilization is over 90% mock will refuse to continue. +# Because once it reach 100% utilization weird things will happens. +# config_opts['plugin_conf']['lvm_root_opts']['check_size'] = True + +### pm_request plugin can install packages requested from within the buildroot +# It is disabled by default, as it affects build reproducibility. It can be enabled +# by setting the following to True, but it's not advised to have it enabled globally. +# It's better to enable it per build by using --enable-plugin pm_request +# config_opts['plugin_conf']['pm_request_enable'] = False +# config_opts['plugin_conf']['pm_request_opts'] = {} + +### If you want to compress mock log, enable this plugin +# config_opts['plugin_conf']['compress_logs_enable'] = False +# config_opts['plugin_conf']['compress_logs_opts'] = {} +### Command used to compress logs - e.g. "/usr/bin/xz -9 --force" +# config_opts['plugin_conf']['compress_logs_opts']['command'] = "" +# +# Configuration options for the sign plugin: +# config_opts['plugin_conf']['sign_enable'] = False +# config_opts['plugin_conf']['sign_opts'] = {} +# config_opts['plugin_conf']['sign_opts']['cmd'] = 'rpmsign' +# The options to pass to the signing command. %(rpms)s will be expanded to +# the rpms in the results folder. +# config_opts['plugin_conf']['sign_opts']['opts'] = '--addsign %(rpms)s -D "%%_gpg_name your_name" -D "%%_gpg_path /home/your_name/.gnupg' + +############################################################################# +# +# environment for chroot +# +# config_opts['environment']['TERM'] = 'vt100' +# config_opts['environment']['SHELL'] = '/bin/bash' +# config_opts['environment']['HOME'] = '/builddir' +# config_opts['environment']['HOSTNAME'] = 'mock' +# config_opts['environment']['PATH'] = '/usr/bin:/bin:/usr/sbin:/sbin' +# config_opts['environment']['PROMPT_COMMAND'] = 'printf "\\033]0;<mock-chroot>\\007"' +# config_opts['environment']['PS1'] = '<mock-chroot> \\s-\\v\\$ ' +# config_opts['environment']['LANG'] = os.environ.setdefault('LANG', 'en_US.UTF-8') +# config_opts['environment']['TZ'] = os.environ.setdefault('TZ', 'EST5EDT') + +############################################################################# +# +# Things that you can change, but we dont recommend it: +# config_opts['chroothome'] = '/builddir' +# config_opts['clean'] = True +## you could not really use substitution here so it will not work if overridden: +# config['rootdir'] = '/var/lib/mock/<CONFIG>/root/' +## This works in F25+ chroots. This overrides 'use_container_host_hostname' option +# config_opts['macros']['%_buildhost'] = 'my.own.hostname' + +############################################################################# +# +# Things that must be adjusted if SCM integration is used: +# +# config_opts['scm'] = True +# config_opts['scm_opts']['method'] = 'git' +# config_opts['scm_opts']['cvs_get'] = 'cvs -d /srv/cvs co SCM_BRN SCM_PKG' +# config_opts['scm_opts']['git_get'] = 'git clone SCM_BRN git://localhost/SCM_PKG.git SCM_PKG' +# config_opts['scm_opts']['svn_get'] = 'svn co file:///srv/svn/SCM_PKG/SCM_BRN SCM_PKG' +# config_opts['scm_opts']['spec'] = 'SCM_PKG.spec' +# config_opts['scm_opts']['ext_src_dir'] = '/dev/null' +# config_opts['scm_opts']['write_tar'] = True +# config_opts['scm_opts']['git_timestamps'] = True +# config_opts['scm_opts']['exclude_vcs'] = True + +# These options are also recognized but usually defined in cmd line +# with --scm-option package=<pkg> --scm-option branch=<branch> +# config_opts['scm_opts']['package'] = 'mypkg' +# config_opts['scm_opts']['branch'] = 'master' + +############################################################################# +# +# Things that are best suited for individual chroot config files: +# +# MUST SET (in individual chroot cfg file): +# config_opts['root'] = 'name-of-yum-build-dir' +# Mock will set architecture to 'target_arch' using personality(2) syscall. +# config_opts['target_arch'] = 'i386' +# When host system architecture is not in 'legal_host_arches' list, mock will refuse to switch to +# 'target_arch' and will raise error. +# config_opts['legal_host_arches'] = ('i386', 'i586', 'i686', 'x86_64') +# Contains content of $CHROOT/etc/yum/yum.conf or $CHROOT/etc/dnf/dnf.conf. If DNF is used and +# 'dnf.conf' is not set, then content of 'yum.conf' is used to populate $CHROOT/etc/dnf/dnf.conf +# config_opts['yum.conf'] = '' +# or +# config_opts['dnf.conf'] = '' +# Important! You must use 'assumeyes=1' in yum/dnf.conf otherwise Mock will fail. +# +# Flip this if you want to get rid of warning message on systems which does not support DNF +# Warning! Setting this to False will automatically use Yum on RHEL{6,7} platforms. +# config_opts['dnf_warning'] = True +# +# CAN SET, defaults usually work ok: +# config_opts['chroot_setup_cmd'] = 'install buildsys-build' +# config_opts['chroot_additional_packages'] = '' +# config_opts['log_config_file'] = 'logging.ini' +# config_opts['more_buildreqs']['srpm_name-version-release'] = 'dependencies' +# config_opts['macros']['%Add_your_macro_name_here'] = "add macro value here" +# config_opts['files']['path/name/no/leading/slash'] = "put file contents here." +# config_opts['chrootuid'] = os.getuid() +# config_opts['releasever'] = '20' +# config_opts['yum_common_opts'] = [] +# config_opts['dnf_common_opts'] = ['--disableplugin=local', '--setopt=deltarpm=false'] +# config_opts['yum_builddep_opts'] = '' +# config_opts['dnf_builddep_opts'] = '' +# config_opts['priorities.conf'] = 'put file contents here.' +# config_opts['rhnplugin.conf'] = 'put file contents here.' +# config_opts['subscription-manager.conf'] = 'put file contents here.' + +# If you change chrootgid, you must also change "mock" to the correct group +# name in this line of the mock PAM config: +# auth sufficient pam_succeed_if.so user ingroup mock use_uid quiet +# config_opts['chrootgid'] = grp.getgrnam("mock")[2] + +# config_opts['useradd'] = '/usr/sbin/useradd -m -u %(uid)s -g %(gid)s -d %(home)s -n %(user)s' # Fedora/RedHat +# +# Security related +# config_opts['no_root_shells'] = False +# +# Proxy settings (https_proxy, ftp_proxy, and no_proxy can also be set) +# config_opts['http_proxy'] = 'http://localhost:3128' +# +# Extra dirs to be created when the chroot is initialized +# This is just a list of strings representing chroot paths such as: +# [ '/run/lock', ] +# config_opts['extra_chroot_dirs'] = [] |